Binairo rules and the tips that solve every grid
Binairo rules fit in one breath: equal counts of two symbols in every row and column, never three alike in a row, and no two lines the same. The tips below turn those rules into moves.
PLAY SEA AND SAND IN YOUR BROWSERWhat this guide covers
The Binairo rules take a minute to learn, and the puzzle is known just as widely as Takuzu or the binary puzzle. It is usually printed with 0s and 1s, but any two symbols work. In the examples here they are sea and sand, the pair our own game uses. LinkedIn Tango belongs to the same family.
Below are the rules, then the tips in the order you will reach for them, each tested on a made-up board.
The three rules
How to solve Binairo
1. Pairs
Two matching symbols side by side force the opposite symbol on both ends. Sea, sea means sand before and sand after, wherever those cells exist. Look across and down.
2. Gaps
Two matching symbols with one empty cell between them force the opposite symbol into the gap. Sea, blank, sea: the blank is sand, because sea would make three.
3. Counting
Once a line holds its full share of one symbol, every remaining blank is the other. On a 6×6, the third sea in a row turns all its blanks to sand. Recount after every move. One tile often completes a row and a column at once.
Worked example: opening a 6×6
Cream tiles with a wave are sea. Orange tiles with grains are sand.
A pair. Row 6 has sand in columns 4 and 5. Columns 3 and 6 of that row become sea.
A gap. Row 3 has sand in columns 3 and 5. Column 4 between them is sea.
A gap, then a count. Column 6 now reads sea, blank, sea, blank, blank, sea. The blank in row 2 sits between two seas, so it is sand. That column already has its three seas, so rows 4 and 5 are sand as well.
A vertical pair. Column 4 has sea in rows 2 and 3. Rows 1 and 4 of that column become sand.
Finishing a row. Row 1 now reads sea, sand, blank, sand, blank, sea. The gap in column 3 is sea. That is the row's third sea, so column 5 is sand.
The small tiles are the deductions so far. Nothing was guessed, and the rest of this board falls to the same three moves.
4. One left to place
When a line needs just one more of a symbol, test where that last one can go. Any spot that leaves three of the other symbol together is ruled out.
Worked example: the last sea
The top strip is the row as found, the bottom strip the row after the move. The row holds two seas and one sand, so its three blanks take one sea and two sand. Put the sea in the first cell and both remaining blanks, cells 4 and 5, must be sand. With the sand already in cell 3, that is three in a row. So the first cell is sand.
Cells 4 and 5 stay open. One is sea and one is sand, and this row alone cannot say which.
5. Completing a line
Before you fill the last two or three blanks of a line, check all three rules together. The counts tell you how many of each are left. The triple rule removes most arrangements. On a small grid there is usually one survivor.
6. Comparing near-identical lines
This is where rule 3 earns its place. When a finished row and an unfinished row match in every filled cell, the unfinished one must differ in the blanks.
Worked example: two rows that cannot match
The top row is complete. The bottom row matched it in four cells and had two blanks, in columns 4 and 5, needing one sea and one sand. Sea then sand would copy the top row exactly. So it is sand, then sea.
Use this late. It only works against a line that is completely filled, and it compares rows with rows and columns with columns, never one with the other.
Common mistakes
- Only looking across. Pairs and gaps run down columns as well. Half the easy moves are vertical.
- Counting once. Counts change with every tile. A row that was stuck a minute ago may now be finished.
- Treating two alike as wrong. Pairs are fine. Only a third is banned.
- Comparing against unfinished lines. Rule 3 proves something only when one of the two lines is complete.
- Taking the coin flip. If two blanks look like a guess, another line crossing them holds the answer.
How Sea and Sand plays it
Sea and Sand is the Binairo in Mundane Games. You fill the grid with sea and sand until every line sits in balance: half sea, half sand, never three in a row, and no line repeats. A solved board settles into a woodblock shoreline print.
There is one daily board, the same for everyone in the world, worth up to 100 points towards the weekly league. Every board is solvable by logic alone, and there is a hint to save you when you are stuck. Premium adds Unlimited: any difficulty, as many boards as you like. You can play Sea and Sand in your browser without an account.
Questions
- Are Binairo and Takuzu the same puzzle?
- Yes. Binairo, Takuzu and binary puzzle are names for the same game: two symbols, equal counts in every line, no three alike in a row, and no repeated rows or columns.
- Can two of the same symbol touch in Binairo?
- Yes. Two side by side is allowed. Three in a row, across or down, is not. Diagonals do not count.
- Does every binary puzzle use the unique rows rule?
- No. Some versions use only the first two rules. Classic Binairo uses all three, and so does Sea and Sand.
- Do you need to guess in Binairo?
- Not on a well-made grid. Pairs, gaps and counting solve most boards, and the harder ones add the last-one test and the comparison of finished lines.
- What is the best way to start?
- Scan every row and column for two alike side by side or two alike with one gap between. Fill what they force, recount, and scan again.